Here’s another way to resurrect old frames when they break using the plastic ends I make. Just dismantle the parts and cut the ears off the top bar where the wooden end slots in. No measuring necessary, nothing needs to be done with the bottom bar. Then simply assemble the bars into the molded plastic ends. They work with 5/8″ x 1″ top bars and 3/4″ x 1/2″ bottoms, or you can mill your own crossbars as per the instructions. These ends are made from food grade HIPS. Note: Often the old wooden bars will shrink, so it’s recommended to wire the frames, which is easy using the lugs molded into the ends, there’s no threading the wires through little holes etc. they simply wrap around as per included instructions. Sale is for 40 pieces to make 20 frames, CROSSBARS NOT INCLUDED. We’re taking America back one product at a time. Spehar products, imagination + unfair advantage We apologize for the increase in price, raw material and production costs have skyrocketed, we just filled an order for $105.00 that cost us $115.00, either we pass on the added costs or discontinue products.