This is for sixty (60) Deep 9 1/8″ Plastic Frame Ends as per gallery photo. Here’s another way to resurrect old frames when they break using the plastic ends I make. Just dismantle the parts and cut the ears off the top bar where the wooden end slots in. No measuring necessary, nothing needs to be done with the bottom bar. Then simply assemble the bars into the molded plastic ends. They work with 5/8″ x 1″ top bars and 3/4″ x 1/2″ bottoms, These ends are made from food grade HIPS. Note: Often the wooden bars will shrink after a while so it’s recommended to wire the frames, which is easy using the lugs molded into the ends, there’s no threading the wires through little holes etc. they simply wrap around the lugs as per included instructions. The ends come with instruction sheets, assembly/wiring and crossbar dimensions, if you choose to mill your own. Items in all photos, except the plastic ends, are for illustration purposes and are NOT INCLUDED (wood crossbars, boxes, bees etc.) Spehar products, imagination + unfair advantage. We apologize for the increase in price, raw material and production costs have skyrocketed, we just filled an order for $105.00 that cost us $115.00, either we pass on the added costs or discontinue products.