Car Paintless Dent Repair Tools Kit Hail Damage Auto Removal Slide Hammer Puller About 2-in-1 Dent Removal T Bar Tools Feature : Professional Design Using the principle of leverage to design the dent puller is ergonomic, the dent bridge puller with a unique arched bridge can adjust the spacing and rotate the button to better fit the dents, the efficient and labor. Paintless Repair The T-bar dent puller is made of tempered high-carbon stainless steel and standard stainless steel. in the parts of the body contact with high-quality rubber precision package, can avoid damage to the original paint, even the rubber hammer suitable for uneven dents has a good rubber package. Widely Used Suitable for any auto dents, repair door dings and hail damage and other dents. Efficient action on automobile, refrigerator, washing machine and other metal surface dents. Easy to Used Tools coming with detailed repair steps introduction for operate, it makes the dent removal process so easy. Instead of spending hundreds of money in 4s shops, our car dent removal puller repair tool kits can help you repair your cars by yourself for many times, so it can save a lot of money and time for you. Note: This tool can handle about 70% – 80% of dents. the smooth and hail the pit to repair effect are better, the impact to have sharp edges, sharp body lines and the paint has been damaged is difficult to repair. About Different Sizes Glue Puller Tabs SpecificationsMaterial: strengthen plastic Features:1. Different tabs for different dent lifter or the Slide Hammer, Works with All Glue Pullers.2. Unique small pits design, fit for Auto Body Dent Repair, this special face can bond the glue well, also clean it easily, the size can match perfectly with dent puller/lifter.3. Durable design allows for perfect placement and superior adherent properties. Packing Include: 1 x 2-in-1 Dent Removal T Bar Tools 1 x 24PCS Glue Tabs1 x Mini Suction Cup How to use the Dent Puller: Step 1: Clean dent surface, If the dent so small and can’t see where is it, use a dent board to check where is the dent.Step 2: Put the glue sticks to the gun and heat, connect the power source and preheat for 5-10 minutes.Step 3: According to the dent size to choose the Glue Puller Tab, then put the heated glue on the puller tab, immediately place the puller tab in the center of the dent and hold on until it sticks.Step 4: Let the glue cool for about 5-8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter.Step 5: After the glue cooling, use a dent lifter or bridge puller to align and press the puller to pull up the dent. Repeat the above steps until the dent disappears.Step 6: After finishing the dent, use the alcohol to clean the glue on the car and the puller tabs.